LED head unit L16665-110
| Parameter | Description / Value | Unit | |
|---|---|---|---|
| Focal length | 10 | mm | |
| Irradiation area (*1) | Approx. φ3 | mm | |
| Wavelength | 280 | nm | |
| UV irradiance (*2) | 350 | mW/cm2 | |
| LED design life (*3) | 5000 | h | |
| Cooling method | Not required | － | |
| Operating temperature range | +5 ℃ to +40 ℃ | － | |
| Storage temperature range | -10 ℃ to +60 ℃ (no freezing) | － | |
| Operating humidity range | 20 % to 80 % (no condensation) | － | |
| Storage humidity range | Below 80 % (no condensation) | － | |
| Applicable standards | Safety standards | IEC 61010-1/A1 | － |
*1: Irradiation area measured at the focal length.
*2: Maximum UV irradiance within the irradiated area measured at the focal length.
*3: Average time required for UV irradiance to reach 70 % of the initial value at an operating temperature of 25 ℃.
Controller C16659 series
| Parameter | C16659-0-□□ (*4) | C16659-1-□□ (*4) | C16659-2-□□ (*4) | Unit | ||
|---|---|---|---|---|---|---|
| Input voltage (AC) | 100 V to 240 V, single phase 50 Hz / 60 Hz (*5) | — | ||||
| Power consumption (*6) | Max. | 25 | W | |||
| Cooling method | Not required | — | ||||
| Operating temperature range | +5 ℃ ～ +40 ℃ | － | ||||
| Storage temperature range | -10 ℃ to +60 ℃ (no freezing) | － | ||||
| Operating humidity range | 20 % to 80 % (no condensation) | － | ||||
| Storage humidity range | Below 80 % (no condensation) | － | ||||
| External control | Irradiation control, irradiation signal, various error signals | — | ||||
| Communication control | N/A | Control via USB | Control via RS-232C | — | ||
| — | Irradiation control, irradiation signal,
accumulation / display / reset of irradiation time, program setting in auto irradiation, various error signals |
|||||
| Applicable standards | EMC standards | IEC 61326-1 Emission limits: CISPR 11 Group 1 Class A Immunity requirements: Table 2 |
— | |||
| Safety standards | IEC 61010-1/A1 | |||||
*4: The square symbol □ in each type number indicates a suffix that represents the specifications of the AC adapter.
・When no AC adapter supplied, no suffix is added. The user needs to prepare an AC adapter that outputs 12 V DC and 24 W or more.
In that case, EMC and safety testing should be performed by the user.
・When an AC adapter supplied, a suffix is added. A1: For Japan, A2: For U.S., A3: For Europe, A4: For China, A5: UK, A7: Thailand
IIn the case of C16659-0, the “-0” will be omitted and so the type number will be C16659.
*5: Input voltage to the controller should be 12 V ±0.5 V DC.
*6: Power consumption when 4 heads are operated.
Characteristics
Spectral distribution (Typ.) (*1)
Irradiance distribution (Typ.) (*1)
*1: The center of the external dimensions of the LED head unit may not coincide with the center of the irradiated light. Adjust the installation position as needed.
The shape of the irradiated light varies depending on the irradiation distance, for example, becomes close to a square.
There are individual differences in the irradiance distribution between LED head units due to variations in the emission intensity of LED elements.